Extravagant performances involving the making of soap bubbles have become incredibly common in recent years. Most often, these shows are held at graduation parties in children's institutions, and when celebrating birthdays. It is worth trying to organize such an event yourself. Practice in advance, figure out how to make soap bubbles at home. Financial costs for this event are minimal. Of course, a ready-made bottle with a ready-made solution is sold in the store, but it is much more interesting to create it yourself. This process will captivate both adults and children.

For colorful performances, giant soap bubbles are needed; they must shimmer in all shades and be unbreakable. A soap bubble generator has been developed and used for performances. The principle of operation is that a soap solution of a certain composition is placed in a container. Bubbles are automatically blown out when exposed to air flow. Stencils with holes are placed in the outlet hole various shapes. When the generator is turned on, large soap figures of bizarre shapes are blown out, changing their color. A soap bubble generator is not a cheap pleasure; they are usually rented for children's party. Many parents make homemade devices from what they have on hand. By helping dad make this device, the child will experience delight in the creative process.

It would be good to prepare a solution for soap bubbles using soft water that has gone through the distillation process. Boiled water is suitable; in this case it is not advisable to use tap water. Water from tap networks is hard, it contains a lot of salts, their presence has a bad effect on obtaining a high-quality soap film.
In order to increase the density, glycerin is added to the liquid for soap bubbles; such a substance can be found in pharmacies. The recipe allows you to use sugar instead of glycerin.
Study the recipe carefully and follow the proportions. Excessive amounts of glycerin or sugar will cause the mixture to be too concentrated, making it difficult to form bubbles.
If the bubble liquid is less concentrated, it is easier to blow bubbles, which is convenient for a small child.
Professionals say that best quality soap figures can be obtained from a mixture previously kept in the cold for at least a day. This is necessary for the foam to settle.
Strong wind and dust make the blowing process difficult, high humidity- makes it easier.

Props for the performance

As devices for blowing, improvised means, whatever your imagination tells you, are suitable.

Prepare the following equipment:

tubes of all possible diameters and lengths;
various frames and shapes, they can be made with your own hands from thick wire;
shaped baking molds;
plastic bottles of various sizes with the bottom cut off;
hoops;
plastic carpet beaters;
net;
slotted spoon, colander.

To get large bubbles, you can make a device consisting of two slats connected by two ribbons. A loop is formed from these ropes. Before use, the ropes are dipped into the soap mixture, the slats are moved apart and oscillating movements are made. Using a loop made in this way, large soap bubbles are formed.

Homemade soap mixtures are safer than factory-prepared ones. Often the bottles do not indicate the composition of the contents or the date of manufacture. By making this mixture with their own hands, parents will select high-quality ingredients that are safe for children.

Glycerin solution

Let's figure out how to make soap bubbles with glycerin. The recipe is quite simple to follow, the ingredients are safe and non-toxic, and will not cause allergies in children.

Traditional recipe

purified water - a full glass;
brown laundry soap - 20 grams;
pharmaceutical glycerin - 30 ml.

Before you create soap bubbles for children, you need to grind the soap, for example, grate it, put it in a warm liquid and stir until dissolved, strain. Add about two-thirds of the glycerin and try to blow the bubble. If the test is unsuccessful, increase the amount of glycerin.

Using a detergent product

Using dishwashing liquid to wash dishes will help blow out large bubbles.

Recipe:

soft purified water - 200 ml;
dishwashing liquid (“Fairy”, “Biolan”) - 30 ml;
glycerin - 30 ml.

Use high-quality detergent and mix with liquid. Add glycerin to the homogeneous mixture in parts, periodically checking its readiness.

Using detergent

This recipe involves mixing the soap mixture in advance, several days before use.

Solution composition:

boiling water - a full glass;
washing powder - 15 grams;
ammonia - three drops;
glycerin - ¼ cup.

All components specified in the recipe are added to the boiling liquid and mixed thoroughly until completely dissolved. Cool and keep in the cold for at least three days, strain. Refrigerate for at least 10 hours, after this time it can be used.

Glycerin-free solution

Are you wondering how to make soap bubbles at home, but you don’t have any glycerin in the house? Consider the series available ways how to make soap bubbles without glycerin.

Classic version

Shake a large glass of boiled water with 150 ml of dishwashing liquid, add 1/2 tbsp. spoons of sugar and mix thoroughly. Leave the prepared solution in the cold for at least 24 hours.

Safest option

Pour 75 ml of delicate shampoo for children (“no tears”) into 200 ml of water, leave the mixture for 24 hours in a cold place (but not freezer!). After this add 25 grams granulated sugar and stir well.

Glamorous option

To make the resulting colorful balls burst less, create a soap mixture by mixing water and your favorite shower gel in a ratio of one to three. If desired, you can add aromatic essential oil. This solution produces pleasantly smelling, shimmering soap balls.

Non-standard composition

The strength of the air figures increases with the addition of corn syrup. To prepare a high-quality solution, take 300 ml of dishwashing liquid, 700 ml of water and 0.5 cups of corn syrup. After mixing thoroughly, refrigerate overnight.

Durable soap bubbles

Is it possible to make soap bubbles at home that don't burst? Of course, you can, you just need to strictly follow the instructions.

First option

Soap balls prepared using this recipe are not very large, but durable. You need to prepare 1 glass of dishwashing detergent, half a glass of glycerin and three glasses of soft chilled water. You need to mix everything thoroughly and wait until the foam settles. Now the resulting solution is ready for use. Please keep in mind that the product is dishwashers use is not recommended.

Second option

This is a more labor-intensive method, but it is the one that allows you to blow huge, non-popping soap figures of various shapes.

Cooking method:

Bring 600 ml of purified water to a boil.
Pour 1.5 cups of glycerin into the hot liquid, add 20 drops of ammonia.
Add 50 grams of powdered powder to this mixture. detergent.
Mix well and let the mixture sit for at least three days.
Strain the solution and place in the refrigerator overnight.

Third option

From a solution prepared in this way, you can blow out a huge bubble that can completely cover your baby. For this you will need a large hoop covered with fabric.

Solution composition:

clean water - four glasses;
dishwashing detergent - one glass;
glycerin - 100 grams;
regular granulated sugar - 50 grams;
gelatin - 50 grams.

Pour gelatin with water and wait until it swells. Remove excess liquid, add sugar and place over low heat, avoiding boiling. When the sugar has dissolved, add all the other ingredients and stir. Give it a couple of hours and you can put on a fun show.

Quality control

To check whether you have a high-quality solution, you need to blow a few bubbles as a test.

Characteristics of the correct solution:

small soap bubbles are blown out without any problems;
large bubbles retain their integrity for up to 30 seconds;
When touched with fingers soaked in soapy water, the bubbles do not burst.

If all the rules are followed, you will have an excellent solution for making soap bubbles.

Multicolored

To get soap bubbles that shimmer with all colors, you need to stock up on food dyes (that is, safe in contact with skin) in advance. Divide the prepared mixture into several parts, tint them with dyes of the selected color. Adjust the hue saturation to your liking. Painted bright soap bubbles will delight children.

People have been fond of blowing bubbles from various soap solutions since time immemorial. And although thousands of years have passed since then, both children and adults enjoy doing this now. It is very difficult to imagine a children's party without a soap bubble show; children get great pleasure from it. Put a little effort into organizing such a holiday for your kids at home.

If you truly love entertainment, then this will be interesting for you, because games with soap bubble cause not only wild delight and interest in children, but also in adults. When blowing soap bubbles, I always dreamed that the soap bubble would not burst, but it turned out that the life of the soap bubble ended in the prime of life, when it could still fly and fly.

What you need to organize games with a soap bubble:

1.Water

1.Empty container

3.Tube

4. Soap solution

5. Wool glove

Sequencing:

1.Make a soap solution

2. We put on a glove

3. Blow a bubble

4. We are happy with the result.

Despite its simplicity, the process of making soap bubbles has several secrets that you need to know. For example, it is worth knowing that for soap bubbles NOT It is advisable to use hard water. Chilled boiled water is ideal, to which you need to add shampoo or liquid soap. In this case, the concentration should be 1:10. This figure is not strict, but it is also not advisable to overdo it.

In case you are going to make soap bubbles small child, you might want to consider using a baby shampoo that won't cause irritation if it accidentally comes into contact with the eyes. One of the secrets to big, strong bubbles is the addition of gelatin or glycerin.

Recipe for making homemade soap bubbles

There are several ways.

The easiest way to make bubbles at home

Take 100 ml. dishwashing detergents
Add 50 ml. glycerin and 300 ml. water
Stir thoroughly and you're done!

Recipe for making non-bursting bubbles

Recipe one

Let me clarify right away that to receive ready mixture you need to wait at least three days, so you should prepare in advance for a walk that involves such entertainment. So, first we prepare the water. Regular tap water will not work. The fact is that it contains impurities of salts, and salts, in turn, make the bubbles inelastic. No matter how hard you try, blow out big bubble from a solution made on the basis ordinary water, you won't succeed. This is why it is better to use distilled water. Measure out 600 milliliters and bring the water to a boil.

Then add 300 milliliters of regular glycerin to boiling water, which can be purchased at your nearest pharmacy, 20 drops ammonia(sold there), and then add 50 grams of powdered detergent (cleaning or washing powder).

Mix the solution thoroughly so that all ingredients are completely dissolved in it.

There will still be some sediment at the bottom, but that's normal. Cover the resulting solution with a lid and leave for two to three days at room temperature. Don't forget that children are curious creatures, so keep the container with the solution out of reach of little hands. After this period, the solution should be thoroughly filtered by passing it through a piece of gauze folded in three or four layers. And we wait again, but we already store the filtered solution in the refrigerator. After 12 hours, you can pour it into a bottle and go for a walk. Of course, this recipe cannot be called easy to prepare, but the result is worth it. The bubbles from it turn out to be large, do not burst for a long time and shimmer in different colors.

Recipe two

To prepare a solution for this recipe, we will need 800 milliliters of water (remember that it must be distilled), 200 milliliters of any dishwashing detergent, 100 milliliters of glycerin and 50 grams of gelatin and sugar. First, pour boiling water over the gelatin so that it swells. Drain excess water, add sugar to the gelatin and dissolve the mixture into low heat without allowing it to boil. After this, pour in all the water, detergent and glycerin, mix. Please note that you should mix very carefully so that foam does not appear on the surface of the solution. From such a solution it is possible to blow strong and large bubbles. And the ingredients in it are practically safe, if you do not take into account the dishwashing detergent, which I am prejudiced against.

Recipe three

The good thing about these bubbles is that you can touch them. With light contact with hands and even water, they remain unharmed. To prepare such a solution, you need to combine 100 milliliters of transparent lubricant (this is a reason to overcome shame when visiting a sex shop))), 200 milliliters of dishwashing detergent (preferably with a thicker consistency) and 100 milliliters of glycerin. Add 800 milliliters of boiling water to the mixture, stir, but without forming foam. The solution can be immediately poured into the bottle.

There are several ways that, while still preparing the solution, will help you determine whether you are doing it correctly. The first is to blow a small (about 30 millimeters in diameter) bubble and time the time during which it does not burst. If it lasts for half a minute, then the solution is good. You can check it another way. Touch the blown bubble with a finger moistened with the same solution. If the bubble does not burst, it means you have prepared the solution correctly.

"Tool" for creating huge bubbles

A classic straw, of course, will not work in this case. You can tie a woolen thread to two wooden skewers of the same length, and then moisten it generously in a soap solution. By vigorously moving and spreading the skewers, the inventors of this design obtain large soap bubbles. Neither my husband nor I got anything out of this venture except a bunch of splashes. Another idea, borrowed from the Internet, justified itself. You will need a cord about 150 centimeters long, a large bead and two sticks. First, we tie a cord to the end of one stick, thread the bead at a distance of 75 centimeters from the knot, and then tie the same end of the cord to the other stick. We tie the remaining end of the cord to the first knot. The result is a design of two sticks, between which a cord in the form of a triangle with a weight bead is stretched.

We dip the cord in the soapy solution, let it soak thoroughly, and then straighten the sticks with outstretched arms. Please note that sudden movements are excluded, but you won’t be able to make bubbles too slowly, since the solution from the cord will simply drain to the ground.

A walk with such a “toy” will definitely be appreciated by your children. And not only yours, because don’t attract attention to yourself huge bubbles can not. And further. For a walk, I recommend dressing your children in clothes that you don’t mind ruining, because I haven’t yet been able to remove stains from bursting bubbles so that not a trace remains.

Video on how to make soap bubbles

Interesting facts about soap bubbles

Mentions of the first soap bubbles were seen in frescoes found during excavations in the city of Pompeii. These frescoes depicted children with soap bubbles;

If you blow a soap bubble in severe frost (-25 C), it will quickly freeze in the air, acquiring an almost ideal spherical shape, and will break when it hits the ground;

There are many artists who delight the public with their main work - creating soap bubbles of various sizes and shapes.

Bubble will turn out strong precisely thanks to glycerin, which makes the shell of the soap bubble stronger.

Today, as promised, we are sharing secrets and recipes for “unpopping” bubbles. The secret ingredient for a high-quality solution is ordinary. So, we present to your attention a recipe for soap bubbles with glycerin , time-tested recipes.

Recipes for “reliable” soap bubbles

Recipe 1

600 ml distilled water;
200 ml of Ferry detergent;
100 ml glycerin.

Recipe 2

1 liter of distilled water;
a little baking powder for dough;
25 ml;
2 spoons of sugar;
200-300 ml Fairy detergent.

Recipe 3

800 ml distilled water;
200 ml dishwashing detergent;
100 ml glycerin;
50 grams of sugar;
50 g gelatin.

Cooking method:

Soak the gelatin in water and leave to swell.
Strain and drain excess water.
Add sugar to warm gelatin.
Dilute the resulting mixture a small amount distilled water.
Combine all other ingredients and stir.

Recipe 4

600 ml boiled water (hot);
300 ml;
20 drops of ammonia;
50 grams of any detergent (powder).

Cooking method:

Mix all ingredients and leave for 2-3 days.
Filter the solution and put it in the refrigerator for 12 hours. Bubbles made in this way are strong and large.

Recipe 5

800 ml distilled water (hot);
200 ml thick dishwashing detergent;
100 ml of lubricant gel without impurities;
100 ml glycerin.

A few secrets for making bubbles

Secret 1

You need to use soft water for the solution. Hard water contains a large number of salts As a result, the bubbles are fragile and short-lived. To eliminate this drawback, you can boil the water and let it settle, but it is best to use distilled water.

Secret 2

Use warm water for the solution. All ingredients dissolve faster in such water.

Secret 3

Dishwasher detergent is not suitable.

Secret 4

The bubble “lives” while it is wet, so glycerin or sugar with gelatin is added to the solution. This prevents the soap film from drying out longer.

Secret 5

Foam - main enemy soap bubbles! It is necessary to prevent foam from appearing on the surface of the solution, so it must be mixed with caution.

Secret 6

To increase the strength of the bubbles, glycerin (or sugar) is added to the composition.

Secret 7

After preparing the solution, we check its quality. To do this, blow out a bubble and touch it with a finger previously soaked in a soap solution. If the bubble does not burst, then we have prepared the correct solution. The bubbles will be the most durable and will even withstand contact with water.

Drawing with soap bubbles

How to make soap bubbles with your own hands: popular recipes, ideas for games and creativity

You can play with soap bubbles at home, in rainy weather, or better yet, outside (in the park, at the playground, in the country, etc.). Let me remind you of popular recipes for soap bubbles and ideas on how to use them.

Why make soap bubbles at home when you can buy:

1. We cannot always know exactly the exact composition of soap bubbles that are sold in stores (and it may be far from safe for children).

2. Homemade soap bubbles are more affordable, and their ingredients can usually be found at home.

3. Any quantity can be prepared soap solution for creating bubbles (for drawing or homemade soap bubble show).

Why soap bubbles are useful for children:

1. Firstly, this is a fun activity that all children like and always gives a festive mood.

2. Secondly, games with soap bubbles and creativity (for example, drawing with soap bubbles) develop fantasy and imagination.

3. Thirdly, blowing soap bubbles is a process that develops the lungs, which is very important for children. You can also play outdoor games with them.

4. Fourthly, soap bubbles can be explored and made for children simple experiments, and then, at school age, you can study physical phenomena.

« Blow a soap bubble and look at it. You can study it all your life without ceasing to learn physics lessons from it.”

Lord Kelvin

An important ingredient in recipes - this is quality water. If you use hard water, this will affect the quality of the bubbles (they will be small, burst quickly and inflate poorly).

What kind of water is best to take for making soap bubbles:

drinking water without gas
distilled water
filtered water
boiled water (it must first be cooled, strained, and not drained of any sediment that may be at the bottom of the kettle).

Please note - you cannot take tap water, it contains calcium ions, this affects the quality of the bubbles.

Glycerol- its one popular ingredient in different recipes soap bubbles. It is used in pure form. Glycerin can be purchased at any pharmacy.

What can you replace glycerin with: gelatin and sugar, mix them in equal proportions and add to the soap solution (about 30 g).

What affects the quality of homemade soap bubbles:

1. The quality of soap and other products that are used in different recipes.

2. Environmental conditions:

wind and dust should be avoided,
high air humidity (for example on a rainy day or in a room with a humidifier) gives good results,

3. Water quality.

RECIPE No. 1 “Strong soap bubbles”

Compound:

glycerin 25 g.
sugar 2 tsp
dishwashing liquid 2 tbsp.
water 150 g.

Cooking method:

1. Add dishwashing detergent to the water, stir the sugar well until homogeneous mass(but do not foam).

RECIPE No. 2 " Classic recipe soap bubbles"

Compound:

water 100 g.
glycerin 20 - 30 g.
glycerin or laundry soap (without fragrance additives) 10 g.

Cooking method:

Grate the soap on a fine grater.
Dilute in water, the soap should completely dissolve. Strain the soap solution.
Add glycerin.

RECIPE No. 3 “From dishwashing liquid”

Compound:

water 100 g.
dishwashing liquid 30 g.
glycerin 30 g.

Cooking method:

Important: for good results, you need to choose a quality dishwashing detergent.

1. Add dishwashing detergent to the water, stir well until smooth.

2. Pour in glycerin (preferably gradually).

If the bubbles do not inflate well, it is better to add glycerin.

RECIPE No. 4 “From baby shampoo”

Compound:

baby shampoo 200 g.
water 400 g.
sugar 6 tsp

This liquid should sit for 24 hours, after which it should be added. This is the safest composition for children, which is suitable for the youngest. It is better to choose a baby shampoo labeled “tear-free.”

Cooking method:

1. Mix baby shampoo with water.

2. Add sugar and stir.

RECIPE No. 5 “Foam bath”

Compound:

water 100 g.
bath foam 30 g.

Cooking method: mix water with bubble bath.

RECIPE No. 6 “From liquid soap”
Compound:

liquid soap 100 g.
water 20 ml.
glycerin - 10 drops

Cooking method: mix the ingredients and place in the refrigerator for 2 hours.

These are Andryusha and I’s experiments with soap bubbles in Newton Park, where we studied physical phenomena.

RECIPE No. 7 “With gelatin for giant bubbles»

Compound:

distilled water 800 ml.
dishwashing liquid 200 ml.
glycerin 100 ml.
sugar 50 g.
gelatin 50 g.

Cooking method:

1. Gelatin needs to be soaked in water, it should swell.

2. After this, you need to strain it and remove excess water.

Z. Place gelatin in a saucepan and add sugar, cook, without bringing to a boil, until a homogeneous mass is formed.

4. Add water, glycerin and dishwashing detergent to the mixture.

5. Stir gently, but do not foam.

RECIPE No. 8 “For giant bubbles”

sugar - 1 part
glycerin - 1 part
dishwashing liquid - 2 parts
water - 6 parts
a pinch of baking powder for dough

Method of preparation: stir all ingredients, refrigerate for 12 hours.

How to blow giant bubbles:

You will need:

wool thread
two sticks(for example, knitting needles or wooden sticks)

How to do:

1. Tie a woolen thread to sticks.

2. Immerse the thread in the soap solution so that it is saturated.

3. To blow soap bubbles, you need to move the knitting needles in different directions (bring together and apart).

Checking the quality of the prepared mixture:

Before using the resulting mixture for soap bubbles, it is better to test them, depending on the result - either use them for their intended purpose or redo the recipe. In any case, the recipe that suits you can be found through trial and error.

There are several ways:

a small soap bubble (3 cm in diameter) should last about 30 seconds without bursting.
dip your finger in the soap solution and touch the soap bubble; if the bubble remains intact, then the composition is prepared correctly.

If you are using a recipe with glycerin, you need to consider:

if you get heavy bubbles they don't fly - add more water,
if the bubbles burst quickly- add more glycerin.

How to blow soap bubbles:

1. Bottles for soap bubbles. You can use factory-made sticks from bottles of soap bubbles. From the latest acquisition, soap bubbles are blown very well with the help of such a “sword”.

2. Giant Bubble Device are obtained using a device - 2 sticks and a specially twisted rope (detailed manufacturing workshops can be found on the Internet).

3. Cocktail straws.

Lots of straws , secured with tape, will help blow out small bubbles.
One cocktail straw - allows you to blow large bubbles. To do this, you need to cut the tube into 4 or 6 parts at the end and bend them upward. The soap mixture will stick better.

4. Wire frames. You can make a bubble blower specially from wire (you can take wire from a hanger or chenille wire, for needlework). Or buy special arcs for blowing soap bubbles.

5. Plastic bottle. You need to cut the bottle in half and use the top part to inflate.

6. Using your hands. Soap bubbles can be blown using your hands.

7. Can be used household items: fly swatter, funnel, cookie cutters, colander, etc.

8. Bubble guns. For example, we have this pistol with imaginarium batteries.

9. Special toys for blowing soap bubbles: cars, frogs, etc.

10. Soap bubble generator.

11. Rainbow bubbles are produced if on a cut off plastic bottle put on a terry sock, soak it in a soap solution and drip paint or food coloring on top.

12. Wool mittens(and even socks) allow you to catch and hold soap bubbles in your hands.

13. Plastic tubes from ballpoint pens.

14. Cardboard tubes from rolls of paper towels and household napkins.

HOW TO USE SOAP BUBBLES:

Soap experiments. Freeze the soap bubble in the freezer or outside in winter. Then, it can become an object of research. Don't forget to arm yourself with a magnifying glass and a camera.
Soap show. Make giant bubbles or "bouncing" bubbles for a children's party or just for fun.
Drawing with soap bubbles. To do this, simply add paint (gouache, watercolor, food coloring) to jars of soapy water and, using a regular factory-made soap bubble wand, blow colored bubbles onto the paper.
Floating candles. If you pour water into a wide dish or basin, start floating candles, you can blow soap bubbles while the candle flame is burning. It turns out very beautiful and magical!
Matryoshka. You need to pour a little soap solution onto a plate. Using a straw, you need to inflate a large bubble, which forms a hemisphere. Then, you need to carefully disconnect the tube from the bubble, but at the same time, it should remain inside. Then, you need to inflate a new bubble. It turns out to be a “matryoshka” made from soap bubbles.

Summer is in full swing - and I want something like this... Something fun, simple and - a sea of real summer sensations! One of great options — bubble festival . Yes, yes, a holiday: any, even the most boring, evening with soap bubbles turns into an adventure. It’s fun and beautiful, plus new sensations, new observations, new discoveries...

Oh, soap bubbles!..

You can spend a quiet evening of experiments, you can have a funny competition, or you can have a noisy pampering for the kids... By the way, how many adults can walk past children blowing soap bubbles and not show their “class”?

Today we have prepared for you 7 recipes for making soap bubbles at home . But they can be used in yard conditions, and in country houses, and in parks, and in holidays, and in walking conditions, and even in a laboratory game to study the properties of soap bubbles!

What is important to know in order to make soap bubbles at home Fine?

Of course, the main thing is the solution and what sticks (tubes, frames) you use for soap bubbles. Below we provide 7 recipes for soap bubble solution. You can choose the one that suits you best, but don’t be surprised: you may have to “adjust” it to your conditions. Let some helpful tips help you.

The best children's books

Useful tips for those who make soap bubbles at home:

It is better to use for preparing a solution boiled water, and even better - distilled.
The fewer impurities (perfume and other additives) there are in the soap or other detergent used to prepare the liquid, the more reliable the result.
How to make the solution denser and the quality of soap bubbles better? To do this, use glycerin or sugar dissolved in warm water.
The main thing is not to overdo it with glycerin and sugar, otherwise it will be difficult to blow bubbles.
A less dense solution produces less stable bubbles, but they are easier to blow out (suitable for babies).
Many bubble lovers advise leaving the solution for 12 to 24 hours before use.
At the start, before blowing a bubble, you need to wait for a clean, solid film (on which you will blow), without additional small bubbles along the edges that sometimes appear. Bubbles must be carefully removed or waited for them to disappear. In general, it is advisable to avoid foam: insist, cool the liquid for soap bubbles - as long as there is less foam.
Wind and dust in the air are no help for soap bubbles.
High air humidity is a helper.

How to make a solution for soap bubbles: 7 recipes for all occasions

Recipe 1, simple: soap bubbles from dishwashing liquid

You will need:

1/2 cup dishwashing liquid
2 glasses of water
2 teaspoons sugar

Mix all ingredients thoroughly. Ready!

You can use a similar composition where glycerin is used instead of sugar:

2/3 cup dishwashing liquid
4 glasses of water,
2-3 tablespoons of glycerin.

Mix all ingredients thoroughly and put the mixture in a cool place for 24 hours. Glycerin can be purchased at any pharmacy.

In order to do colorful soap bubbles , add to the mixture food coloring(2-3 teaspoons for the entire volume or divide into parts to make bubbles of different colors).

Recipe 2, for the little ones: how to make soap bubbles from baby shampoo?

You will need:

200 ml baby shampoo,
400 ml distilled (boiled, melted) water.

This liquid should sit for 24 hours, after which you should add:

3 tablespoons glycerin or 6 teaspoons sugar.

Recipe 3, fragrant: bubble bath bubbles

You will need:

3 parts bath foam,
1 part water.

Recipe 4, original: soap bubbles with syrup

You will need:

2 cups dishwashing liquid
6 glasses of water
3/4 cup corn syrup

Recipe 5, cheap and cheerful: solution for soap bubbles from laundry soap

You will need:

10 glasses of water
1 cup grated laundry soap
2 teaspoons of glycerin (or a solution of sugar in warm water, or with gelatin).

You can get by with a combination of water and soap without additional additives (for example, if there is simply no glycerin). Grated soap should be poured into boiled water, hot water at that, and stirred until full dissolving soap. If dissolution is difficult, you can slightly warm the mixture with continuous stirring. Do not bring to a boil!

And if you don’t want to grate laundry soap, then use the following composition:

100 ml liquid soap,
20 ml distilled water,
10 drops of glycerin (after the foam settles, i.e. after about 2 hours. It is better to infuse the liquid in a cold place).

Recipe 6: extra strong soap bubbles for experimenters

You will need:

1 part concentrated sugar syrup (proportion: 1 part water 5 parts sugar: for example, 50 g sugar - 10 ml water),
2 parts grated soap
4 parts glycerin,
8 parts distilled water.

Using this solution, you can, for example, build various figures from soap bubbles by blowing them onto a smooth table surface.

Recipe 7: Giant soap bubbles for a children's party

You will need:

50 ml glycerin,
100 ml dishwashing detergent,
4 teaspoons sugar,
300 ml water.

The solution for giant soap bubbles can be prepared in a basin, and they are “blown out” using a gymnastics hoop or a frame specially twisted from flexible material. To be honest, you won’t even have to blow - you’ll rather have to wave the frame or slowly pull a large, strong bubble out of the basin.

Giant soap bubbles on the beach (video):

What should I blow into? Tubes/frames/sticks for soap bubbles

As sticks for soap bubbles, you can use tubes of different diameters, frames, cocktail sticks (especially with the tip cut crosswise or in the form of a fringe and bent “petals”), hollow blades of grass or pasta, molds for cutting out dough, funnels, you can buy them in the store special guns for soap bubbles or just blow them through your fingers! 🙂

And if you are invited to a real bubble festival or arrange one at your place, you can make original stick-frames with your own hands from wire and colored beads, for example, these:

Another one original idea- use to blow large soap bubbles... !

Soap bubbles show

And finally, look how beautifully and unusually soap bubbles are used in theatrical shows.