Not long ago we discovered this modern, fast and very convenient way of decorating easter eggs. Of course, there are some nuances, but we’ll talk about them directly in the recipe.
Ingredients for decorating Easter eggs with thermal labels:
thermal labels
hot water
Applying thermal labels to eggs:
Shrink labels are sold in sets like these. When buying them, pay attention that they are not shrunken, because they are very sensitive to heat and quickly lose their shape. If the labels are bad, their use will be very difficult. Also, select eggs so that thermal labels fit on them. Judging by the assortment in our city, the right eggs You can choose from the 1st category. The second one will be too small.
Boil the eggs. You can apply a thermal label to already colored eggs, but if the eggs were painted with food coloring, keep in mind that when lowered into water, the dye will begin to dissolve and it will be possible to apply the label only to eggs of the same color. Place the thermal label on the egg as shown above. Place the egg in boiling water, literally after 20-30 seconds, sometimes a little longer, the label will tighten tightly boiled egg. Dry the egg in the label and that’s it. Beautiful Easter eggs are ready.
Comparison of Easter egg decorating methods:
Like everything classic, they are very familiar to the eye. At the same time, thanks to natural products, you don’t have to worry about the safety of these eggs. Painting with onion skins is very durable and does not get dirty. If you take such an egg in your hands, they will remain clean. If you put an egg in water, the water will not color. These eggs can be additionally, without any reservations, decorated with thermal labels. I prefer this method of coloring eggs, especially since there are children in the family.
Of course, beautiful and bright. But I try not to use this method, because it is not known what these dyes are made of and how safe they are for health. Moreover, if you pick up such an egg, it becomes very colored and dirty. This means that inevitably some part of the dye is consumed internally. You can apply a thermal label to such an egg, but the paint will partially wash off and may become uneven. Although these eggs are fun to decorate, I would not give them to children.
I consider the above to be safe. harmful substances This label does not enter food. This is a very beautiful and varied decoration for eggs. But you will have to peel such eggs either using scissors or a knife. Thermal labels are quite durable. Despite this small drawback, we love decorating eggs this way. After all, the process itself is interesting and enjoyable. Bon appetit!!!
Decorating eggs for Easter is a good tradition that is observed by the Christian world even today. All Orthodox believers must paint eggs for the holiday, using various ways. Thermal labels for eggs have become the most popular in recent years; let’s try to understand how to glue them in this material. The information offered will be relevant for those people who do not wish to use food colorings or natural ingredients.
If you have an idea of how to use thermal labels for eggs, you can get unique decorative designs. This method is considered simple and economical. There is no need to have artistic skills, since various compositions and patterns have already been applied by professional craftsmen. Much harder to choose nice option images from their variety. Sticker manufacturers offer a huge selection of designs, including Bible themes, floral and cartoon images.
Each set, including thermal labels for eggs, comes with additional instructions for use. However, all stickers have general principle application, which will require:
- the thermal label itself;
- boiled chicken eggs;
- small container;
- boiling water;
- spoons.
A standard set of stickers for eggs requires the presence of 7-10 pieces of thermal labels. They are separated from the tape by cutting with scissors along the dashed line. The separate label resembles a regular pipe that fits onto boiled egg. It is almost completely hidden in the sticker blank.
After this, the egg is lowered into the prepared container, which is filled with boiling water. This is where the heat-shrink properties of the stickers come into play, providing compression of the product and a tight grip of the egg by the thermo-label.
In fact, the question of how to use thermal labels for eggs has already been resolved. All that remains is to remove the egg from the boiling water using a spoon. Usually the water does not cool down quickly, so you can transfer the stickers to another 2-3 eggs. To avoid getting burned, it is recommended to place them in a container using a prepared spoon.
It is also possible to boil water directly in the container and maintain it high temperature. Then it’s enough just to lower the spoon with the egg into the water, wait for the thermal label to shrink and take it out ready egg. It is important not to allow the film to shift, otherwise you will have to redo everything due to lack of aesthetics. appearance eggs with a crumpled label.
It’s not at all difficult to get a beautifully decorated Easter egg if you use ready-made 58x60 thermal labels. Little children will really like this gift, because the egg does not crack, and the natural or artificial coloring does not stain their hands. It is also important that the dye does not get on egg white when cleaning, since it is not at all useful for children.
Decorating eggs for Easter is one of our family's favorite activities. Previously, the process was reduced to the following procedure: over the course of several months we collected onion skins, on Easter they threw it into water, put eggs and boiled it. The resulting colored eggs were this golden brown color.
We didn’t buy special paint because our family considered it harmful.
But I always wanted to not only make the eggs monochromatic, but also somehow decorate them so that there were patterns.
And how wonderful it is that thermal labels for decoration were invented.
There are a lot of drawings on such labels: churches, faces of saints, children's motifs. I really like labels with different designs: Gzhel, Khokhloma and other folk motifs.
The set is designed for seven eggs.
The label must be cut before gluing.
The decoration process is as follows:
Bring water to a boil in a bowl,
We put a label on the egg,
Place the egg on a spoon or in a ladle (depending on how you adapt),
Place the egg in boiling water
Label under the influence hot water shrinks and wraps the egg tightly
There is a little secret here. In order for the label to lie evenly, you need to put it on the egg not evenly, but slightly obliquely, so that the top is pushed a little higher and the bottom a little lower. Once you get the hang of it, you can achieve a more or less even sticker.
The result is beauty. The complete impression is that the eggs are painted.
But there is a significant drawback to these stickers. When you peel eggs, it is very difficult to get rid of it. It is difficult to break, sometimes you even have to use a knife.
I can’t say how much such labels will cost now, but in past years they were very cheap: from 1 to 2 hryvnia for one set of seven stickers.
Overall, despite the shortcomings, this is a very convenient way to quickly and easily decorate eggs for Easter.
There is another sticker with which you can decorate eggs very beautifully, in in this case These are stickers from the manufacturer Alt, which is discussed in this review.
If you have absolutely no time for creativity - there is no time to invent drawings and patterns, you can simply buy special stickers. All of them are bright and beautiful, some with faces of saints, animals and birds - an option for children. There are pictures that will give Easter eggs a painted look - the choice depends on your preferences. How to put stickers on Easter eggs? Find out today. 
Will be needed
- medium sized eggs,
- stickers, according to the number of eggs.
How to cook with photos step by step
Keep in mind that the size of the stickers is standard, but the eggs can be very large. Small eggs If they fit, the stickers may crumple into an accordion, which will not look very nice. 
Before sticking easter stickers, the eggs need to be hard-boiled. Cut the strip of stickers along the dividing lines. Place each piece on the egg, making sure it’s even. Otherwise, when the picture is pasted, it will turn out crooked, and in order to redo it, you will have to remove it and repeat the whole procedure again. 
Pour about a liter of water into a bowl and bring to a boil. Take a tablespoon or even larger, place the egg with the sticker and carefully lower it into boiling water. The heat will cause the cellophane to shrink into the shape of an egg. 
After wiping with a towel, you can immediately serve Easter eggs to the table. To make them look even brighter and more beautiful, you can pre-color them in any color, using dyes or improvised means (beets, blue cabbage, etc.).
This activity can be entrusted even to children, but preferably those of school age, since there will be close contact with boiling water. The only inconvenience is that when peeling the egg you have to pry off the cellophane sticker with a knife, then it will easily tear. That is, during the festive meal, it is advisable to have something spicy on hand.
Happy Easter! 
Every year, adults and children eagerly await the arrival of Easter, on the eve of which a special ritual is always carried out - decorating Easter eggs. This is done in different way. Some, adhering to ancient traditions, make unique Easter eggs, others decorate eggs with dyes, and some keep up with new trends and cover eggs with colorful iron-on stickers. We will tell you further about how to properly apply a sticker to an egg.
How to put stickers on eggs: choosing the required products
Before you start decorating eggs, you need to prepare the following ingredients:
- Eggs. On average you will need 8-12 eggs. The quantity should correspond to your preferences and the size of your family. Some people need 5 eggs, while others need more than 10 eggs. The size of the eggs is also important. They should be of medium size: eggs that are too small will slip out of the sticker, and eggs that are too large will not fit into it. In addition, it is better to buy eggs exclusively white to highlight the beauty of the stickers.
- Water. In order for the eggs to completely “sink”, you will need 1.5-2 liters of water and a shallow saucepan. The water should only be filtered, otherwise when it boils it will leave an unsightly residue on top of the stickers.
- Salt. You will need half a teaspoon.
- Set of 10 Easter iron-on stickers. The variety of designs on stickers is very large: cartoon characters, traditional patterned and floral motifs, church symbols, faces of saints, as well as images of temples.
There are many contradictions regarding the use of church symbols. Shells with such stickers require special treatment - they cannot be thrown away. After the holiday, as a rule, the shells are burned or taken to the temple, where they are disposed of according to church canons.
The process of decorating eggs with stickers
- Boil the eggs. To do this, boil water, add salt, and then immerse the eggs in the bubbling water. After a minute, reduce the gas and continue cooking them for 3-4 minutes. After this, remove the eggs and cool them in cold water. Then dry the shell thoroughly. Do not throw out the water, as it will still be needed.
- Prepare your stickers. Use scissors to cut the tape into individual stickers.
- Put stickers on eggs. Carefully push the egg into the sticker, trying to place it exactly in the middle. This will allow the sticker to adhere tightly to the surface of the egg, without defects in the form of a crooked pattern with creases.
- Secure the sticker with boiling water. Heat the water in which the eggs were boiled, carefully lower the eggs with stickers into it for 7-9 seconds, and then pull them out. The stickers will immediately take the shape of the egg and stick tightly to the shell.
- Place the eggs on a kitchen towel or paper napkin until completely dry.
Loading...