Instructions

According to scientists, the most healthy water(which is popularly called) has a structured structure. What are the advantages and differences between structured water and regular water? Firstly, structured water removes waste and toxins from the body and cleanses every cell of the body. The unique properties of such water are explained by its high penetrating properties. Secondly, as scientists have proven, a person who drinks structured water is less likely to. Children with allergies experience noticeable relief, and in adults it returns to normal. arterial pressure. To create such an elixir of health, youth and beauty, you need to return filtered water to its natural crystalline structure. And for this there are simple, but very effective ways.

There are several ways to return water to its natural structure. One of them is freezing. In this case, it is assumed that the water is melt water, which is obtained from ice and snow. This can be obtained using the technology of nature itself. This is one of the most labor-intensive methods, but, on the other hand, every family has water and a freezer, which means that everyone has the opportunity to cook living water.

First, pass the water through any filter, then place it in a frost-resistant container. In winter, you can simply take the water out, and in summer you can put it in the freezer. After some time, the first ice crust forms on the surface of the water; it should be removed. After this, wait until another two-thirds of the water freezes, punch a small hole and drain the unfrozen liquid through it. Now defrost the ice and enjoy clean living water. It should be remembered that it is not advisable to boil structured melt water, re-freeze it or store it for a long time.

It is useful to drink a glass of cold melt water in the morning on an empty stomach instead of the usual mug of tea or coffee. All the liquid that is drunk in the morning is removed from the body, cleansing it. While the liquid, drunk, remains in the body, causing swelling. As for boiled water, the body does not absorb it. If you want to boil water, bring the kettle to just the beginning of a boil (when small bubbles appear) and immediately turn it off. You can add 1 tbsp to a glass of cold melt water to taste. a spoonful of honey lemon juice or apple cider vinegar, this additionally stimulates the body, gives vigor and higher performance.

Another type of living water is magnetic. Scientists have long proven that it has special permeability through cell membranes, a strong bactericidal effect, stimulates the immune system and improves metabolism, and also cleanses blood vessels of foreign proteins and cholesterol plaques. To magnetize an ordinary drinking water, you will need a special magnetic funnel or faucet attachment. In many cases, manufacturers add a magnet to the water filter. You can find out about this on the filter label, where this information must be indicated. The healing properties of magnetic water last for one day.

Another good way to revive the water - infuse it with silicon, which can be bought at any pharmacy. To do this, add 3-5 black silicon stones to 3 liters of water, cover the container with water with gauze and let it steep for two days. Then carefully pour the water into another container, without pouring 2-3 cm of liquid at the bottom of the vessel, because flint precipitates harmful chemical elements and microorganisms. The resulting water will be saturated with silicon. As you know, this is very important for full functioning human body.

The resulting silicon water can then be improved by the freezing method described above. It is better to freeze it in a non-metallic container, for example, plastic or impact-resistant glassware. When the ice melts, you get that same living water. Getting it is a hassle, but it's worth it. Silicon water should be stored for no more than 6-7 hours.

According to research by gerontologists, main reason aging, are various environmental factors and primarily the water we drink

Scientists conducted a number of studies and came to the following conclusion about the effect of water on the aging process:

People will live up to 150 years if they keep their genes intact as much as possible

First of all, genes are destroyed by poor quality water, overeating, eating food that is difficult for the body to digest. In the Himalayas, a group of scientists studied melt water glaciers It turned out that it is very useful for humans, because it protects genes from damage, due to which the life expectancy of the mountain population, which constantly consumes melt water, is 100-120 years. If people from the city drink it, they will live up to 150. According to scientists, melt water contains an “anti-aging gene”

How to prepare living water?

Pour regular tap water into a saucepan and place in freezer. We are preparing melt water.

Melt water is living water.

We know very well that people who constantly consume clean melt water, for example, mountain residents, live much longer than urban people, while knowing nothing about immunity problems, the need for vitamins and a whole bunch of different diseases. Melt water improves metabolism, helps cleanse and rejuvenate the body.

What does melt water do in the body? The fact is that melt water has a smooth, clear structure, similar to that of a human cell, and therefore is perceived by the body as a related product. Once in the body, melt water displaces and replaces old cells that have exhausted their potential, and thus sharply accelerates metabolism, promoting fairly rapid cleansing and rejuvenation of the body. In addition, melt water, due to its large internal energy potential, gives a person a lot of strength, vigor, and energy. It has been repeatedly noted that people who drink melt water become not only healthier, but also more efficient, brain activity, labor productivity, and the ability to easily solve difficult problems increase.

What should a person who lives far from natural sources do? No need to be upset. This water can be prepared at home.

How to prepare melt (protium) water

This technology for producing clean, biologically active drinking water was proposed by hydraulic engineer Alexey Labza, for which I bow to him.

To prepare protium water, it is better to take clean water. If you use tap water, it is advisable to filter it with a household filter. Filtered water in plastic bottle, preferably, place in an enamel pan in the freezer. In winter - on the balcony, this is even better. After some time, the water will set into ice. This ice contains concentrated molecules of heavy water, which freezes at a temperature of +3.8 C. Therefore, we pour the unfrozen water into another container and expose it to the cold again. And we simply throw away the frozen water from the first pan. After the water in a pan exposed to frost freezes by about 2/3, pour out the unfrozen water: it contains concentrated chemical impurities of our civilization and excess mineral salts. The ice remaining in the pan is frozen protium water. It is thawed before use only when room temperature. Under no circumstances should it be heated, as it will be lost. medicinal properties. You immediately taste qualities you will feel the difference between melt water and the one you usually drink.

How to improve healing properties water?

Leave it in the sun for several hours so that the water is charged with the energy of the Sun and the sky. This way you will give it the properties of living water. Living water is water found in the open air: rivers, lakes. Dead water flows underground, which is what you drink from the tap every day. Living water penetrates everywhere and revives everything. Dead water has the opposite properties. It stops all processes in the body, everything freezes and stops. Water of eternal sleep. It is especially good to leave the water out in the open air overnight during Christmas.

Put a few silicon crystals in it, so that later you will have silicon health. Or imbue it with silver by placing a silver item in a vessel.

The remaining water is that useful and healing liquid about which there are tales and legends.

When this water is used for cosmetic purposes, wrinkles are smoothed out, wounds and ulcers are healed, the skin is rejuvenated; when taken orally, overall well-being improves, tone increases, restoration vitality body, all organs and tissues are cleansed and healed.

The properties of melt water remain for 7-8 hours after defrosting the ice, but to obtain a noticeable healing effect, it is better to drink melt water immediately after defrosting. At the same time, its temperature should not exceed 10°C (small pieces of ice may still float on its surface). It is beneficial to drink at least 2-3 glasses of this water per day. Noticeable effect observed even with daily consumption¾ glass of melt water in the morning on an empty stomach.

I wish you all, my dears, excellent health and longevity!

HOW TO MAKE “LIVING” WATER AT HOME...

Many of us have long been accustomed to using a water filter, because in this way we, at least a little, purify tap water from various harmful impurities, and turn"dead" water into "living". But water filtrationis not the only way to make “living” water, there are many more ways that are much more effective than filtration, and we’ll talk about these methods today.

According to numerous scientific studies, it has been proven that the most beneficial water for humans is melted water or structured water. You probably immediately thought about boiling, because we generally believe that boiled water is the healthiest, but this is far from true. Yes, boiling kills all harmful substances present in water, but it also contributes to the appearance of various mechanical particles in the water, as well as salts, chlorine, heavy metals and viruses. Besides, boiled water It is considered “dead” water, and such water cannot bring any benefit. So let's look for another way to structure water.

As we have already said, melt water is very useful for our body, in addition, frozen water acquires its original structure. And if we also freeze filtered water, we will get real natural elixir health, youth and beauty.

So, anyone who has a freezer or freezer can make melt water, and every home has a freezer. First, filter the water, then pour it into an enamel cup or pan, place it in the freezer and watch when a small ice crust appears on the surface of the water, which needs to be removed. Then wait until 2/3 of the water freezes, rinse a hole in the ice and drain the water that remains unfrozen at the bottom. Then defrost the ice, and you can enjoy clean, and most importantly, “living” water. But remember that melt water cannot be boiled and frozen again, as it will lose all its beneficial properties. Also, melt water cannot be stored for a long time.

There is another way to make “living” water; this method is easier to use, but no less effective. Pass tap water through a filter, and then pour a tablespoon of holy water into clean water. Thus, you will not only make the water “living”, but also sanctify it, giving it beneficial properties. It has been proven that a tablespoon of holy water can turn 5 liters of plain water into holy water.

We know about living water from fairy tales. She could heal and even revive people. It turns out that not everything in fairy tales is fiction. Living water exists. Nothing is known about reviving people, but living water can help treat some diseases and have a positive effect on everything. How to make living water at home?
Method one. Take a deep cup, fill it with water and place it in the freezer. After some time, a crust of ice will grow on top. Remove it and leave the container until completely frozen. Remove the finished ice and let it thaw, but not completely. When a piece of ice remains, about the size of half a glass, remove it. The remaining water is living water. Together with ice, you will get rid of harmful substances. The properties of water are also influenced by positive emotions. If you are irritated and in a bad mood, do not make water.

The second method, making living and dead water at home, requires basic knowledge of electrical engineering. If you live in a city, then first pass the water through a filter or let it settle. Place two stainless electrodes through the lid into a glass jar. Supply power, diode D231 or D232 to one electrode. To the other electrode - directly. Place the cathode in a tarpaulin bag. It can be sewn from a fire hose. The water in the jar should be below the edge of the bag. Plug in 220 volts, the process has begun. Do not bring to a boil under any circumstances. After a few minutes (from 5-30, depending on the strength), turn it off. Remove the bag carefully so as not to mix it with other water. This is living water, let it sit for 30 minutes and you can drink it. Shelf life is no more than two weeks. Dead water remained in the jar.

Source: www.flickr.com

Living water: how to make it at home

We have already learned about what filters are. However, the story with water does not end there. For water to become useful and healing, it needs to undergo any of these procedures.

As you probably already understood, the filter is a very important attribute of the life of a city dweller. But cleansing is far from the last step on the path magical transformations water from dead to living. According to scientists, the healthiest water has a structured structure.

What is the beauty of structured and its main difference from the usual one? Firstly, water with a crystalline structure cleanses every cell of the body and toxins. Her unique properties explained by high penetrating properties. Scientists have proven that people who drink structured water are less likely to get sick and take medications. Children with allergies feel noticeable relief, and high blood pressure decreases in adults.
So, your main task is to return filtered water to its natural crystalline structure and then it will become a real elixir of health, youth and beauty. And these simple but very effective methods will help you with this.

Read also:

Melt water
There are several ways to return water to its natural structure. And one of them is freezing. It is one of the most labor-intensive, however, and every family has a freezer, which means there is also the opportunity to prepare living water. To begin, pass the water through any filter, then place it in a frost-resistant or enamel container. In winter you can simply take it out into the cold, and in summer you can put it in the freezer. After some time, the first ice layer forms on the surface of the water. It needs to be removed. Afterwards, you will have to wait until another 2/3 of the water freezes, punch a small hole and drain the remaining unfrozen liquid through it. Now you can defrost the ice and enjoy the purest water. Just know that structured melt water cannot be boiled, re-frozen or stored for long periods of time.

Magnetic water
Scientists have long proven that water has a special permeability through cell membranes, a strong bactericidal effect, cleanses blood vessels from cholesterol plaques and foreign proteins, improves and stimulates. It is easier to magnetize ordinary drinking water; you only need a special magnetic funnel or funnel or attachment to the faucet. Manufacturers often add a magnet to the filter composition with a share of water. Such information is always indicated on the label. The healing properties of magnetic water persist throughout the day.

Shungite water
In 1719, by order of Peter I, the first Russian resort, Marcial Waters, was built in Karelia, famous throughout the world for its living water. And all thanks to the only deposit of a unique stone on earth - shungite. Its wonderful ability to structure has been known since ancient times. The stone collects up to 95% of various pollutants on its surface, removes heavy metals from water, removes colloidal iron from water pipes, nitrates, nitrites, pesticides, dioxins, phenols, helminth eggs, as well as many viruses and bacteria. The obvious advantages of this type include the fact that water after shungite can be boiled, so you can safely cook food or brew tea. Before use, you need to thoroughly rinse the shungite stones, then place them on the bottom of the vessel and leave for three days. As it appears white plaque on shungite, it needs to be removed, and the stones will be replaced with new ones about once every six months. Shungite water can also be successfully used for cosmetic purposes: it protects the skin from premature aging and free radicals.

Every person dreams of a long and happy life, which is not overshadowed by various ailments. And traditional medicine has always sought to fulfill this desire. She has accumulated vast experience in studying medicinal plants and many recipes have been created to relieve various diseases.

One of the proposed traditional medicine The miracle cure is water, which is called living and dead. Do you remember how in fairy tales, when they used this method to resurrect a dead hero? First he was sprinkled with dead and then living water.

History of application

The gifts of nature have long been used by man in medicinal purposes. One of them, which deserves special attention, is “life-giving water.” Even in ancient manuscripts, researchers found a mention that during his military campaigns along the mountain ranges of the Pamirs, Caucasus and Tien Shan, Alexander the Great found a source healing water. He collected the liquid into a jug, but his daughter stole it and poured it on herself. As a result of this, she became invisible and immortal.

There is also information that many Popes, Chinese emperors and other powerful people organized expeditions in search of an elixir that would allow them to obtain immortality. All these fairy tales and legends are clear confirmation that our ancestors knew about the existence of living and dead water.

Sources

Today you can make living and dead water with your own hands. And in ancient times, people took it from natural sources.

The dead one was in stagnant lakes and swamps. This liquid was not consumed internally. It was used only by healers for various external potions. The water of mountain rivers, glaciers and waterfalls is considered alive. It was drunk and also used in the preparation of various medicines.

Modern research

Today, to obtain healing liquid there is no need to search for its sources. To do this, it is enough to make a living and dead water apparatus at home. When used as a result of hydrolysis, so-called activated water is obtained.

Soviet scientists were busy studying the properties of this liquid back in the 80s of the 20th century. However, the results of all experiments and experiments were simply kept secret for the general public. However, everything secret sooner or later becomes clear. After some time, doctors and traditional healers learned about the results of the experiments. And here the work of Western researchers played a big role. Their results could be read in published scientific articles.

Research has proven that living water, also called catholyte, becomes negatively charged due to hydrolysis. This transformation helps it obtain high regenerating and immunostimulating properties. This makes it possible for a liquid that has undergone the hydrolysis process to become healing and be used to get rid of many ailments.

The unique properties of such water were confirmed by the USSR Pharmacological Committee. At the same time, it was said about its absolute harmlessness not only for external, but also for internal use.

The water that accumulates near the positive electrode after electrolysis is called anolyte. Its unique properties have been known to traditional healers since time immemorial. Thanks to this water, people managed to escape from rotting wounds and bedsores.

Obtaining healing liquid

In order to get activated water, you do not need to look for some distant and sometimes inaccessible sources. To do this, just open the tap and use a special device.

Based on the basic concepts of chemistry, living water has alkaline properties. They contribute to the healing effect. The properties of dead water are acidic. That is why it exhibits a disinfecting effect.

Electric current passing through plain water radically changes its existing internal structure. At the same time, it erases harmful environmental information contained in the liquid. After such treatment, the water is divided into living and dead. Moreover, each of these two fractions has medicinal qualities.

Experiments on the use of activated liquid

The first apparatus of living and dead water in our country was invented by N. M. Kratov. The idea of ​​creating this device did not come to the author by chance. In 1981, Kratov was treated in hospital. There he was diagnosed with prostate adenoma. Simultaneously with this pathology, he suffered from an inflammatory process in the kidneys. The course of treatment in the hospital lasted for a month, but did not bring tangible results. That is why doctors offered Kratov surgery. He refused surgery and was discharged home.

At the same time, Kratov’s son suffered from a long-term non-healing wound. And the author, who created the apparatus of living and dead water, began to test the properties of the healing liquid on the affected area on his son’s skin. The results were not long in coming. The wound healed within two days. Such success inspired the inventor. He began to take this water himself, and soon his health improved. Along with the adenoma, radiculitis and leg swelling went away.

Application area

In addition to Kratov, the healing properties of such water were studied by G.D. Lysenko, as well as a number of other authors. As a result of the research, it became obvious that water, both living and dead, can rid a person of almost fifty items various diseases, starting with a sore throat and ending with stomach and duodenal ulcers.

This list also includes such common diseases as colds and flu, runny nose and radiculitis, hypertension, etc.

Making at home

In order to use the healing liquid, it is enough to make a device of living and dead water with your own hands. Of course, such devices are not difficult to find on sale. Buying and delivering them will not be difficult.

However, the purchased apparatus for obtaining living and dead water, when examined in detail, has a rather simple design. This makes me think about saving money. After all, the price of such a device is not so low. It is much easier to make a living and dead water apparatus with your own hands. It will only take a little time and not large quantity materials. The skill of our masters is always present.

Main details

In order to build a living and dead water apparatus with your own hands, you will need:

Glass jar;
- diode bridge that rectifies the mains voltage;
- a bag made of waterproof fabric;
- two electrodes;
- power cord.

With the help of skillful hands, all these details can easily turn into homemade apparatus living and dead water.

Electrodes

This part must be made of food grade stainless steel. Salad bowls left in the house from Soviet times are perfect for this role. But if they are not there, then any utensils made from stainless steel will do. A graphite rod can be used for the anode.

If the apparatus for preparing living and dead water is assembled using a half-liter jar, then the length of the electrodes should be 100 mm. However, this volume can be increased. In order to create a device for living and dead water with your own hands, you can take a three-liter jar. In any case, the electrodes can be extended. Their size should be such that the distance between the metal and the bottom of the glass container is at least 5-10 mm.

Stainless steel sheets suitable for the manufacture of the anode and cathode should be 0.8-1 mm thick. Some craftsmen claim that they created the apparatus for making living and dead water using aluminum electrodes.

Pouch

This part will be needed to separate the resulting water fractions. As a rule, a tarpaulin is used to make a bag. This could be a piece from a fire hose or a gas mask bag. But in any case, the material for the bag should not contain any impregnation. In order to ensure that there are no foreign substances, the prepared piece must be placed in water and boiled. The components used in impregnation will manifest themselves when heated.

The length of the finished bag must be in full accordance with the height glass jar, which is used to create the apparatus. When cutting this part, cut off the required length of the tarpaulin. The bottom of the bag is sewn up with a piece of the same material or food-grade plastic is inserted.

Device assembly

The diagram of the apparatus that receives living and dead water is quite simple, and you can familiarize yourself with it in the article. To assemble the device, a U-shaped cut is made on the positive electrode. It is necessary to place a cloth bag on the anode. It will collect dead water. There is no need to make such a cut on the cathode.

Both electrodes are attached to the jar using an ordinary nylon cover. However, here it is worth using one trick. Due to the fact that such covers have little mechanical strength, it is best to attach the electrodes to them using an insulating sealing gasket. This will avoid unpredictability of their behavior during work. Such gaskets are made of fiberglass (without foil) or any plastic. This part has the appearance of a rectangle with rounded ends. Two holes are cut out on it, the diameter of which coincides with the diameter of the electrodes. The gasket is installed on the plastic cover. During operation, when living water and dead water are formed, the device releases gases from the liquid. For their exit, an additional hole is provided in the lid.

Next, a rectifying diode bridge is attached to the electrodes. It is important to mark the positive and negative outputs to the plate (“+” and “-”). For safety reasons, the bridge can be covered with a lid. When using a threaded diode, the thread must be attached to the positive electrode.

There is another way to assemble a similar circuit. It can be performed with a rectifier bridge. In this case, living and dead water will be produced even more intensively. The device (reviews from craftsmen confirm this) will become four times more powerful. Accelerating the process of preparing healing liquid is especially important when using it systematically.

A power cord with a plug is connected to the diode bridge. Its length must be at least 500-700 mm. At the same time, it is important to insulate all open electrical connections, because for the process that results in living water and dead water, the device consumes an alternating voltage of 220 V. Next, the electrode, which is marked with a minus sign, is placed in a tarpaulin bag and poured into a jar water, and the entire structure begins to work when connected to the electrical network.

Preparing water

Getting the healing liquid is quite simple. To do this, pour water into a cloth bag. Next, a positive electrode is placed in it. This entire structure is immersed in a jar of water. And here there are also some nuances. The water in the jar should not be filled to the brim. It should be slightly below the top edge of the bag.

The whole process lasts no more than 5-10 minutes. Next, the electrodes are removed from the jar. This must be done very carefully. Otherwise, a mixture of the two resulting fractions will occur. At the end of the process, the water from the cloth bag is poured into a separate bowl.

Assembling a device with a different design

Due to the need for careful handling of the resulting fractions, this device is not very convenient. In addition, certain safety precautions must be observed when the live and dead water apparatus is operating.

The instructions for it warn that all manipulations of pouring water and removing the final product must be done without plugging the device into a power outlet.

A device whose design does not include the use of a fabric bag is considered more convenient. In this case, you will need to take two containers. However, banks are not suitable for this. Such containers are distinguished by the absence of a neck and steep, straight edges. The design of the electrodes in such a device remains unchanged. The only difference between such a device is that the anode and cathode must be installed in separate containers. Electrical contact must be ensured between the electrodes. To do this, they are connected with a cotton band wrapped in gauze, which is pre-soaked in water. Such a part will allow ions to move freely. As a result of the operation of the device, both living and dead water will be produced. Moreover, each of them can be seen in a separate container. This allows you to simply disconnect the installation from the network at the end of the work and obtain anolyte and catholyte immediately, and in equal volumes.

In the scheme of this design, as in the previous version, it is advisable to use a light bulb with a power of 15 W. They are usually used in sewing machines and refrigerators. If the electrodes are short-circuited, the light bulb will play the role of a fuse, and if the process does not have any failures, it will act as an indicator. At the beginning of water production, the light from it will be quite bright. Towards the end of the process, the light will begin to dim. The signal about the end of the production of activated water will be its complete shutdown.

Rules for using healing water

The catholyte prepared in the device is an alkaline solution with a bluish tint. It is a clear, soft liquid with an alkaline taste with a pH of 8.5 to 10.5. Catholyte, or living water, is able to retain its healing properties for at least two days. Only in this case it is important that the storage conditions are met. Living water should be kept in a closed container and in a darkened room.

The analyte has a yellowish tint. In addition, the difference between dead water and living water lies in its astringent, sour taste and somewhat acidic aroma. Anolyte retains its properties for half a month. But this only happens when it is stored in a closed container. The acidity of such a liquid is from 2.5 to 3.5 pH.

Activated water should be heated before use. However, some caution must be exercised. Water should be poured into a ceramic or enamel dishes and heated over low heat. Using an electric stove will cause it to lose useful properties. It is strictly forbidden to bring such water to a boil. In this case it also becomes useless.

If both dead and living water are used at the same time, then between their doses you need to take a break of at least one and a half hours. In the case of local application, the pause is much shorter. It is only 10 minutes. This dosing regimen can be explained by the fact that when the analyte and catholyte are mixed, they are neutralized. As a result, the healing liquid simply loses its activity.